| INVENZIONI ۞ BREVETTI |

2018-2020

BREVETTO ECO-TUTA TERMODINAMICA PER LA DIFESA DA COVID19 — INVENZIONE E BREVETTO DI LUCA FALACE

DOCUMENTO SU TESTATA GIORNALISTICA, INFORMAZIONE.IT, DI DIVULGAZIONE, IN DATA CERTA, 18 MARZO 2020, DELL’INVENZIONE DI LUCA FALACE

MOVIMENTO EUROPEO ITALIA: INVENZIONE DI LUCA FALACE PER DIFENDERSI DAL COVID19 – DONAZIONE BREVETTO

https://www.informazione.it/c/B9FB350F-140D-443D-BFB6-25CE69B7EF2F/MOVIMENTO-EUROPEO-ITALIA-INVENZIONE-DI-LUCA-FALACE-PER-DIFENDERSI-DAL-COVID19-DONAZIONE-BREVETTO-PER-FINI-UMANITARI

Roma, ( informazione.it – comunicati stampa – politica e istituzioni) CORONAVIRUS: NECESSARIA E URGENTE UNA RISPOSTA…www.informazione.it MOVIMENTO EUROPEO ITALIA: INVENZIONE DI LUCA FALACE PER DIFENDERSI DAL COVID19 — DONAZIONE BREVETTO PER FINI UMANITARI Coronavirus: necessaria e urgente una risposta europea — Newsletter n.7/2020 — movimentoeuropeo.it MOVIMENTO EUROPEO ITALIA: INVENZIONE DI LUCA FALACE PER DIFENDERSI DAL COVID19 — DONAZIONE BREVETTO PER FINI UMANITARI Roma, 18/03/2020 (informazione.it — comunicati stampa — politica e istituzioni) CORONAVIRUS: NECESSARIA E URGENTE UNA RISPOSTA EUROPEA Coronavirus: necessaria e urgente una risposta europea — Newsletter n.7/2020 — movimentoeuropeo.it MOVIMENTO EUROPEO ITALIA: INVENZIONE DI LUCA FALACE PER DIFENDERSI DAL COVID19 — DONAZIONE BREVETTO PER FINI UMANITARI: “lo studioso Luca Falace, che propone all’attenzione del settore della ricerca scientifica un’invenzione da lui brevettata per l’isolamento dal coronavirus, grazie ad una tuta speciale che consente al personale medico di operare in sicurezza, in ambienti contaminati. Si intitola “Invenzione per difendersi dal coronavirus COVID-19: invenzione e brevetto di Luca Falace”; lo stesso autore tiene a precisare che si è mobilitato non a scopo di lucro, ma, afferma, “per aiutare l’umanità che amo; Come possiamo fare? Se sei uno studioso, potresti consigliare questo libro, creare il passaparola. Se non sei un imprenditore, per poter produrre questa invenzione, non fa nulla, puoi adottare tutte le tue idee, per poter divulgare questa invenzione. Così facendo, magari arriverà qualcuno, che decide di realizzarla. E quindi aiutare oggi e in un prossimo futuro, tutta l’umanità in caso di pandemia”.

movimentoeuropeo.it

FONTE E LINK ARTICOLO MOVIMENTO EUROPEO ITALIA: LUCA FALACE INVENZIONE PER DIFENDERSI DAL COVID19 — DONAZIONE BREVETTO PER FINI UMANITARI:

Consiglio Italiano Movimento Europeo Newsletter n.7/2020 – Coronavirus: necessaria e urgente una risposta europea L’editoriale Iniziative del Movimento…movimentoeuropeo.it

https://movimentoeuropeo.it/component/content/article/9-uncategorised/948-newsletter-n-7-2020-coronavirus-necessaria-e-urgente-una-risposta-europea?Itemid=437&fbclid=IwAR1Afp_owOFlNR0nlraaWbyV3O147Y21lvPKAohpTXXfe9icvj9IKgKAA0c

INVENZIONE PER DIFENDERSI DAL CORONAVIRUS COVID-19 INVENZIONE E BREVETTO DI LUCA FALACE — DONAZIONE BREVETTO PER FINI UMANITARI

INVENZIONE PER DIFENDERSI DAL CORONAVIRUS COVID-19: INVENZIONE E BREVETTO DI LUCA FALACE …

https://play.google.com/store/books/details?id=S8LVDwAAQBAJ&rdid=book-S8LVDwAAQBAJ&rdot=1&source=gbs_atb&pcampaignid=books_booksearch_atb&fbclid=IwAR1ihwEHB_vs4vA0e5npm5jOC8TNMl_-a4rrabzS-66ERUayoRIBSwA22RY

INVENZIONE PER DIFENDERSI DAL CORONAVIRUS COVID-19: INVENZIONE E BREVETTO DI LUCA FALACE – DONAZIONE BREVETTO PER FINI…play.google.com

https://play.google.com/store/books/details?id=S8LVDwAAQBAJ&rdid=book-S8LVDwAAQBAJ&rdot=1&source=gbs_atb&pcampaignid=books_booksearch_atb&fbclid=IwAR1ihwEHB_vs4vA0e5npm5jOC8TNMl_-a4rrabzS-66ERUayoRIBSwA22RY

CHE COS’È E A COSA SERVE — L’invenzione: l’Eco-tuta Termodinamica Climatizzata, è un unica tuta dove è presente sia il riscaldamento, sia il raffreddamento in un unico prodotto. Tale tuta può considerarsi a tutti gli effetti uno scudo, una seconda pelle corazzata, per qualsiasi difficoltà che si possa verificare in natura, oppure in caso di conflitti naturali o voluti dall’essere umano.

Movimento europeo

https://movimentoeuropeo.it/component/content/article/9-uncategorised/948-newsletter-n-7-2020-coronavirus-necessaria-e-urgente-una-risposta-europea

DOCUMENTO DEL MOVIMENTO EUROPEO ITALIA, DI DIVULGAZIONE, IN DATA CERTA, 16 MARZO 2020, DELL’INVENZIONE DI LUCA FALACE

Consiglio Italiano Movimento Europeo Newsletter n.7/2020 – Coronavirus: necessaria e urgente una risposta europea L’editoriale Iniziative del Movimento…movimentoeuropeo.it

[…] lo studioso Luca Falace, che propone all’attenzione del settore della ricerca scientifica un’invenzione da lui brevettata per l’isolamento dal coronavirus, grazie ad una tuta speciale che consente al personale medico di operare in sicurezza, in ambienti contaminati. Si intitola “Invenzione per difendersi dal coronavirus COVID-19: invenzione e brevetto di Luca Falace”; lo stesso autore tiene a precisare che si è mobilitato non a scopo di lucro, ma, afferma, “per aiutare l’umanità che amo; Come possiamo fare? Se sei uno studioso, potresti consigliare questo libro, creare il passaparola. Se non sei un imprenditore, per poter produrre questa invenzione, non fa nulla, puoi adottare tutte le tue idee, per poter divulgare questa invenzione. Così facendo, magari arriverà qualcuno, che decide di realizzarla. E quindi aiutare oggi e in un prossimo futuro, tutta l’umanità in caso di pandemia”.


Storia del Movimento Europeo

Storia del Movimento Europeo A seguito del Congresso dell’Aja (maggio 1948), anche in Italia venne costituito nel dicembre del 1948, un Consiglio nazionale del Movimento Europeo quale organismo di coordinamento tra i parlamentari più europeisti e il Movimento Federalista Europeo (MFE).

Il ravvicinamento tra il Movimento europeo e il Movimento federalista si sarebbe concluso nel 1966 con l’adesione di quest’ultimo al primo.

Il Movimento europeo venne così sposando — dapprima a livello nazionale e poi anche in ambito europeo — le posizioni fondamentali della strategia federalista, riconoscendo l’importanza da attribuirsi all’elezione del Parlamento europeo a suffragio universale diretto, quale condizione indispensabile di ogni effettivo progresso sul terreno politico-istituzionale e ravvisando nell’elezione europea il punto su cui far leva per imprimere una spinta alla ripresa propriamente politica del processo integrativo.

Dopo d’allora, le successive presidenze di Mauro Ferri, Mario Zagari e Giorgio Napolitano hanno ampiamente confermato la piena continuità del rapporto stabilitosi nell’ambito del Movimento europeo tra le principali forze politiche e social-economiche nazionali e l’avanguardia federalista.

Così il Movimento europeo è stato tra i protagonisti in Italia del costante impegno a favore della creazione della moneta unica europea Euro, nonché della difficile battaglia, ancora incompiuta, per delle riforme istituzionali europee che portino alfine all’approvazione di un vero e proprio testo di Costituzione per l’Unione.


ANNUNCIO CONTRO IL CONTAGIO CORONAVIRUS

Metto a disposizione, senza scopo di lucro, a livello nazionale ed internazionale,

il mio Brevetto e la mia Invenzione, per la difesa dal contagio da virus. (passaparola)

Info: [email protected]

Metto a disposizione, senza scopo di lucro, a livello nazionale ed internazionale il mio Brevetto: (domanda di brevetto depositata nell’anno 2018) Eco-Tuta Termodinamica, per ingegnerizzazione e produzione contro il contagio da virus e batteri.

La mia INVENZIONE BREVETTATA (ANNO 2018) oltre a stabilizzare la temperatura del corpo umano, PERMETTE L’ISOLAMENTO FISICO; TERMICO, ANAEROBICO, ASETTICO DEL CORPO UMANO. (Descrizione dettagliata in allegati brevettuali)

QUESTO PERMETTEREBBE AI CITTADINI DI POTER USCIRE DI CASA E DI PROTEGGERE TUTTE LE FIGURE ISTITUZIONALI A TUTTI I LIVELLI, IN PARTICOLAR MODO TUTTE LE FIGURE ISTITUZIONALI PER QUANTO CONCERNE I SOCCORSI MEDICI, L’ASSISTENZA E LA VIGILANZA IN ZONE AD ALTO RISCHIO, IN CASO DI PANDEMIA E CONTRO IL CONTAGIO DA VIRUS E BATTERI.

La situazione è questa: abbiamo la mia invenzione e domanda di brevetto.

Cosa serve: un team composto da un virologo, un ingegnere, un manager, un esperto di comunicazione ed è fondamentale un’azienda tessile statale o privata, che prototipi e produca il prodotto su scala nazionale ed internazionale.

Sono a disposizione gratuita, per aiutare l’ingegnerizzazione del mio brevetto, fornendo tutta la mia documentazione ed gli allegati brevettuali, aiutando in tal senso il sistema nazionale ed internazionale.

Amo gli esseri umani, amo l’umanità e sono a disposizione per aiutare il prossimo. Luca Falace.

Domanda di Brevetto: Eco-Tuta asettica Termodinamica anno 2018.

Inventore e proprietario del Brevetto: Luca Falace Contatti: [email protected] 

Informazioni dettagliate clicca su questo link:

https://lucafalace.altervista.org/eco-tuta-termodinamica-climatizzata/


ECO-SUIT8 | ECO-SUIT THERMODYNAMIC LUCA FALACE’S INVENTION AND PATENT

MOVIMENTO EUROPEO ITALIA: INVENZIONE DI LUCA FALACE PER DIFENDERSI DAL COVID19 – DONAZIONE BREVETTO PER FINI UMANITARI

Coronavirus: necessaria e urgente una risposta europea – Newsletter n.7/2020 – movimentoeuropeo.it MOVIMENTO EUROPEO ITALIA: INVENZIONE DI LUCA FALACE PER DIFENDERSI DAL COVID19 – DONAZIONE BREVETTO PER FINI UMANITARI

Roma,18/03/2020

(informazione.it – comunicati stampa – politica e istituzioni)

CORONAVIRUS: NECESSARIA E URGENTE UNA RISPOSTA EUROPEA

Coronavirus: necessaria e urgente una risposta europea – Newsletter n.7/2020 –  movimentoeuropeo.it

MOVIMENTO EUROPEO ITALIA: INVENZIONE DI LUCA FALACE PER DIFENDERSI DAL COVID19 – DONAZIONE BREVETTO PER FINI UMANITARI: “lo studioso Luca Falace, che propone all’attenzione del settore della ricerca scientifica un’invenzione da lui brevettata per l’isolamento dal coronavirus, grazie ad una tuta speciale che consente al personale medico di operare in sicurezza, in ambienti contaminati. Si intitola Invenzione per difendersi dal coronavirus COVID-19: invenzione e brevetto di Luca Falace”; lo stesso autore tiene a precisare che si è mobilitato non a scopo di lucro, ma, afferma, “per aiutare l’umanità che amo; Come possiamo fare? Se sei uno studioso, potresti consigliare questo libro, creare il passaparola. Se non sei un imprenditore, per poter produrre questa invenzione, non fa nulla, puoi adottare tutte le tue idee, per poter divulgare questa invenzione. Così facendo, magari arriverà qualcuno, che decide di realizzarla. E quindi aiutare oggi e in un prossimo futuro, tutta l’umanità in caso di pandemia”.

movimentoeuropeo.it

FONTE E LINK ARTICOLO MOVIMENTO EUROPEO ITALIA: LUCA FALACE INVENZIONE PER DIFENDERSI DAL COVID19 – DONAZIONE BREVETTO PER FINI UMANITARI:

https://movimentoeuropeo.it/component/content/article/9-uncategorised/948-newsletter-n-7-2020-coronavirus-necessaria-e-urgente-una-risposta-europea?Itemid=437&fbclid=IwAR1Afp_owOFlNR0nlraaWbyV3O147Y21lvPKAohpTXXfe9icvj9IKgKAA0c

INVENZIONE PER DIFENDERSI DAL CORONAVIRUS COVID-19 INVENZIONE E BREVETTO DI LUCA FALACE – DONAZIONE BREVETTO PER FINI UMANITARI






LIBRO IN ITALIANO


BOOK IN ENGLISH


Coronavirus: necessaria e urgente una risposta europea – Newsletter n.7/2020 –  movimentoeuropeo.it


INVENTION TO DEFEND YOURSELF FROM THE CORONAVIRUS COVID-19 INVENTION AND PATENT DONATION FOR HUMANITARIAN PURPOSES

INVENTION AND PATENT OF LUCA FALACE INFO: [email protected]

ANNOUNCEMENT AGAINST CORONAVIRUS I make available, non-profit, nationally and internationally, my patent and my invention, for the defense against virus infection. (Word of mouth)

Info: [email protected]

I make available my non-profit, nationally and internationally, my Patent: (patent application filed in the year 2018) Eco-Thermodynamic Suit, for engineering and production against contagion from viruses and bacteria.

My PATENTED INVENTION (YEAR 2018) in addition to stabilizing the temperature of the human body, ALLOWS THE PHYSICAL INSULATION; THERMAL, ANAEROBIC, ASEPTIC OF THE HUMAN BODY. (Detailed description in patent attachments)

THIS WOULD ALLOW CITIZENS TO BE ABLE TO LEAVE HOME AND PROTECT ALL INSTITUTIONAL FIGURES AT ALL LEVELS, IN PARTICULAR ALL INSTITUTIONAL FIGURES AS REGARDS MEDICAL ASSISTANCE, ASSISTANCE AND SURVEILLANCE IN ZONE IN ZONE PANDEMIA AND AGAINST CONTACT FROM VIRUSES AND BACTERIA.

The situation is this: we have my invention and patent application.

What you need: a team composed of a virologist, an engineer, a manager, a communication expert and a state or private textile company is essential, which prototypes and produces the product on a national and international scale.

I am available free of charge, to help the engineering of my patent, providing all my documentation and patent attachments, helping in this sense the national and international system.

I love humans, I love humanity and I am available to help others. Luca Falace.

Patent Application: Aseptic Thermodynamic Eco-Suit year 2018.

Inventor and owner of the patent: Luca Falace Contacts: [email protected]

 

ECO-SUIT THERMODYNAMIC LUCA FALACE’S INVENTION AND PATENT

ECO-SUIT8 | ECO-SUIT THERMODYNAMIC LUCA FALACE’S INVENTION AND PATENT

 

NEW PATENT 2018 | NEW INVENTION 2019 ECO-SUIT8  ECO-SUIT THERMODYNAMIC

LUCA FALACE’S INVENTION AND PATENT

ITALY

ECO-TUTA CLIMATIZED THERMODYNAMICS  WHAT IS AND WHAT IT IS FOR

The invention: the Air-conditioned Thermodynamic Eco-suit, for the Global Energy Saving, is a unique suit where both heating and cooling are present in a single product. The suit heats or cools every single part of the human body. The air-conditioned suit covers the entire human body, for this reason we talk about air-conditioned suit. 50%

ENERGY SAVING AT GLOBAL LEVEL

The current system, obsolete, creates a useless and enormous consumption and expenditure of energy, in all the civilizations of the Planet. The air-conditioning process is designed to heat, or cool, a material environment, not the human being itself. The air-conditioned thermodynamic suit would solve the problem of global energy saving in the air-conditioning and heating sector in closed environments and for eco-sustainable livability at 50%. This invention would help all over the world, all those people who live in situations of strong heat and cold, would help all the common people in the world in the alternation of the seasons, with hot and cold climate, is a valid and indispensable support, for special government and rescue forces, essential in almost all major sports fields, domestic, for rehabilitation, for open places, for energy saving. The thermodynamic suit is an invention for an eco-sustainable lifestyle, for a global energy saving, to finally reach the current technological level telecommunication, even with your body, as well as with the five senses, resulting in being so in step with the times, with biogenetics, quantum physics and clothing suited to the ecological and technological factor, for the wellbeing of nature and man himself.

 

DESCRIPTION

In the current consumer society, where the process of industrialization has been focused, in the last hundred years, only in the concern inherent in industrial production, causing damage to nature and to human beings themselves, without thinking about the ecosystem. In this sense, only a few decades the focus has shifted to eco-sustainability and energy saving. It is imperative to continue this evolution, to safeguard the planet Earth and future generations. One of the most important global problems in almost all the “civilized” nations concerns energy saving; in urban and domestic public places. Air conditioners, heaters, domestic and public air conditioners, all over the world, consume an incredible useless quantity of energy, much higher than the one in the field of lighting technology and many other energy sectors.

The current system, obsolete, creates a useless and enormous consumption and expenditure of energy, in all the civilizations of the Planet. This is because, in order to heat public and private environments; homes, offices, shopping centers, shops, universities, public and private transport, boats, aircraft, etc. the amount of energy acts in an undifferentiated way, from the number of people present in a closed place. The energy used, to make an air-conditioned place habitable, is indifferent to the greatness of the place of livability of human beings. The main problem of the current climate control lies in the fact that this is not personal. Cooling, or heating, is not addressed to the specific number of components present in a domestic or public environment. The enormous expenditure of energy to heat a microcosm, an environment, is not specific to man, but paradoxically takes two steps. The global air conditioning system heats or cools, first the environment and consequently the heated environment in turn heats or cools the human being. The air-conditioning process is designed to heat, or cool, a material environment, not the human being itself. The technology has now made great strides in the last fifty years and in the last ten years it has even been exponential. This problem, thanks to today’s technologies, can and must be resolved at the origin. In all of Planet Earth the problem and the absurdity of the current air conditioning system, lies precisely in this assumption. In this sense, if we think well about this problem, we can understand the absurdity of energy expenditure related to the environment and not to the individual. Just think of a simple example; Assuming that in 10sqm 50 people enter Indian ranks, it would mean that in a 100 square meter house, where one person would live for example, 500 people could enter. This is the paradox, there is a waste of useless energy for a single individual or for a family unit. It will be understood then, that the energy to air-condition the habitable environment does not serve the individual himself, but serves, above all, for the heating of an environment, where a dinosaur could enter. The current principle of air conditioning is part of the Jurassic. My invention serves to solve this problem at the origin, bringing a global energy saving. The invention of my invention proposes a heating, cooling, personal air conditioning, for each individual present in a private, public and even outdoors, where there is no type of air conditioning.

Use of the invention, commercial and private use: the Air-conditioned Thermodynamic Eco-suit can be used in any place. The air-conditioned suit corresponds to the evolution of the human extension of the human being. In this sense the temperature can be regulated, where the natural human body does not adapt to the surrounding environment: in homes, in public places, for rehabilitative and sporting use. Specifically the use of the air-conditioned suit with very cold weather; on snow-capped mountains, on boats, in very cold places of the Planet Earth, etc. Specifically the use of the air-conditioned suit with very hot weather; in the desert, on boats, in very hot places on Planet Earth, etc.

Use of the invention for safety for public, sporting and special governmental forces: essential in outdoor locations in difficult circumstances, in rescue missions, in hostile climatic environments.

The invention: the Air-conditioned Thermodynamic Eco-suit, for the Global Energy Saving, is a unique suit where both heating and cooling are present in a single product. The suit heats or cools every single part of the human body. The air-conditioned suit covers the entire human body, for this reason we talk about air-conditioned suit. [Table 1, Fig. 1 (1,2,3,4)].

 

According to a research of anteriority and market, today, there is no such product. There are companies specializing in the motorcycle industry, which with bulky vests, waistcoats, wrist warmers, neck warmers, and then with individual products, who try to treat the problem of cold, for a narrow niche of people, who use motorcycles. The products are sold individually and therefore we must calculate that each product has its own charging point, its own ignition, its own battery, its own cable, etc. with a low-eco-sustainable production on a large scale. Furthermore, all the individual products on the market are cumbersome and do not solve the problem of body air conditioning. The products on the market are related to individual cumbersome garments and try to solve only partially the problem of cold in winter. Furthermore, in the summer all these products, clothing and all their accessories, are no longer usable and therefore do not need them. The situation is even further with the times, as regards the body coolness in summer. Currently on the market we find only clothes that, as did the ancients, are worn wet: gilet, cuffs, and collars, in microfiber, which are soaked in water and then worn, to give a temporary coolness, with a very high humidity level, since the garment worn is completely wet and the garment may dry out, thanks to the warmth of the human body, rather than from the external heat and therefore with a very low autonomy of coolness.

Description of the Ecological air-conditioned suit

Clothing: the air-conditioned eco suit comes in various models depending on the commercial price of reference.

1. complete model, [Plate 1, Fig. 1 (1,2,3,4)], or the air-conditioned suit covers the entire human body including the face. (Fig. 13,14,18).

2. full model with face uncovered. (Table 1, Fig. 1,4,5).

3. complete model without hood, leaving the head and face uncovered. (Plate 2, Fig. 9)

4. commercial model leaving uncovered the following parts of the body: head, face, hands, feet. (Table 1, Fig. 2,3,8, Table 1, Fig. 12). In any case, the missing parts, of a commercial model of air-conditioned suit, can be purchased at a later time, with the additions of parts, which make up the complete model, which fully covers the human being.

The fabric: all the materials that make up the clothing can be used, such as carbon fibers, microfiber, aluminum, rubber, latex and all the fabrics that can be cleaned, washable by hand, in the washing machine, dry or with congenial substances to the type of material that is used in the model composition. The Air-conditioned Thermodynamic Eco-Suit for Global Energy Saving presents a series of nets and filaments and consists of two types of containers, one for heating, the other for cooling [Table 1, Fig. 1 (1 , 2,3,4), Fig. 5 (16,18)] allowing energy savings in closed areas and a livability in areas with very hot and very cold temperatures. The suit is equipped with a dual air conditioning system in the fundamental parts of the human body. In some parts of the body the suit is composed of a further cooling-heating system with containers of the same removable material. In the case of hot places in addition to the normal reticle, which covers the whole body, there will be pockets with removable stretch. [Table 1, Fig. 2 (5,7,8), Fig. 3 (12,13,14,15), Fig. 4 (20,21,22), Fig. 5 (19)]. In the first model of suit the complete model will be present all types of air conditioning systems of the Ecological suit. In the following models 2,3,4, the air conditioning systems can be acquired and integrated separately, depending on the needs and use of the suit, if in very hot areas or in very cold areas.

 

The thermodynamic suit thus obtains the supremacy of any commercial and experimental product with regard to governmental forces. Such surrogates remotely can approach; for inventiveness, for quality of use at all levels, for ease of manufacture, for production economics, for effectiveness of environmental results, innovative content and possibility of diffusion at a global level. This invention involves a series of ingenious dynamics and unique mechanisms in the world, as they are gifted, listed and summed up, in their complex conception, which allow a long-term climate control process of hot-cold processes and uniqueness of its kind. The complex and apparent simplicity of the mechanisms of this invention, easy to find on the market, since all the materials that make up the invention are already on the market, with moderate economic and commercial values. All of which, united in a single invention, in a single patent, determine the high value of this invention of a professional and commercial use. A product of the highest quality and ingenuity, which can also be produced at low cost. This invention, the air-conditioned thermodynamic suit, for all this series of characteristics, makes it unique, innovative at global level, would solve the problem of global energy saving in the air-conditioning and heating sector in closed environments and for eco-livability sustainable. This invention would help all over the world, all those people who live in situations of strong heat and cold, would help all the common people in the world in the alternation of the seasons, with hot and cold climate, is a valid and indispensable support, for special government and rescue forces, essential in almost all major sports fields, domestic, for rehabilitation, for open places, for energy saving. This invention, once engineered and marketed all over the world, is at the service of all human beings, enhancing its capabilities, helping the weakest and strengthening the strongest in the service of the weakest. The thermodynamic suit is an invention for an eco-sustainable lifestyle, for a global energy saving, to finally reach the current technological level telecommunication, even with your body, as well as with the five senses, resulting in being so in step with the times, with biogenetics, quantum physics and clothing suited to the ecological and technological factor, for the wellbeing of nature and man himself.

Luca Falace INVENTOR AND OWNER OF THE PATENT

DESCRIPTION OF THE INVENTION

Eco-Thermodynamic Air-conditioned Suit for Global Energy Saving is a unique suit where both heating and cooling are present in a single invention. The suit heats or cools every single part of the human body. One of the most important global problems concerns energy saving; in urban and domestic public places. Air conditioners, heaters, domestic and public air conditioners, all over the world, consume an incredible useless amount of energy.

The global air conditioning system heats or cools, first the environment and consequently the heated environment in turn heats or cools the human being.

The air-conditioned suit corresponds to the evolution of the human extension of the human being. In this sense the temperature can be regulated, where the natural human body does not adapt to the surrounding environment: in homes, in public places, for sporting use.

Very cold climate; on snow-capped mountains, on boats, in very cold places, etc. Very hot climate; in the desert, on boats, in very hot places, etc. Use of the invention for safety, rehabilitation for public use, sports and for special government forces.

Essential in outdoor locations in difficult circumstances, in missions you can help in hostile climatic environments.

The air-conditioned eco-suit comes in various models depending on the reference commercial price.

 

The thermodynamic suit is covered by two types of tubes, which extend like an anatomic branching and run throughout the human body.

A. The first series of tubes the vertical ones; they are tubes with resistances that create heat.

B. The second set of tubes on the suit, are the tubes with fluids. These are hermetically sealed and contain liquid, which can act as a refrigerant or a heater depending on the use of the air-conditioned thermodynamic suit.

In case of heating, the liquid is heated by the heating tubes with heating resistance placed next to the liquid ones.

In case of cooling, the liquid in the tube is cooled in the passage and therefore in contact with the frozen bags present in the main points of the body.

The primary system is represented by the latex that surrounds the entire human body.

The secondary system is that of the bags with liquid in very cold conditions, the liquid inside is heated thanks to the resistances. This can be replaced in places where it is very hot from bags with coolant in ice. In very hot places the primary system serves to balance the heating or cooling of the secondary system, creating a thermodynamic air conditioning of the body.

 

Which will be diagnosed by the internal thermometer of the suit on the display.

The system provides an accumulation of energy to recharge the batteries in movement mode, thanks to the pressure of the steps and the inert movement of balance of the arms, in walking and running mode.

The suit provides a very elastic ergonomic exoskeleton, which supports and regulates posture, enhances the strength of man in walking and running. The properties of strengthening the movements in walking, running and jumping up, are due to the elastic properties of the material.

These act as a launching spring, with each action there will be an opposite and opposite reaction for the third principle of dynamics.

DETAILS INVENTORY

The suit is covered by two types of channels, with tubes for fluids and tubes for heating that extend by anatomic branching for length and width.

The primary system is represented by a latex that surrounds the entire human body, the secondary system, enhanced support removable can be used depending on the area where the climate is very hot, or very cold.

 

The first thermodynamic system is a homogeneous system, for the length and thickness of the suit. This primary system consists of the suit being covered by a lattice of two cooling-heating systems. In the secondary system, that of the bags containing liquid, in very cold conditions, the liquid inside is heated thanks to the resistances.

The suit comes in various models depending on the commercial reference price:

1. complete model, or the air-conditioned suit covers the entire human body including the face.

2. full model with face uncovered.

3. complete model without hood, leaving the head and face uncovered.

4. commercial model leaving the following parts of the body uncovered: head, face, hands, feet.

The suit includes photo-voltaic micro-cells, for automatic charging of batteries with solar energy.

The suit has an assisted postural attitude: for a correct posture constant over time and for the strengthening of the dynamic thrust of the movement of the human body.

This system enhances the strength of man in walking, in running, in movements, in momentum and in action, that is to say, each movement generates an equal and opposite force, gently opposing itself to the push.

ECO-SUIT DATA TABLE AIR-CONDITIONED THERMODYNAMICS

PRODUCT NAME Eco-Suit-8 | Eco-Thermodynamic Air-conditionedsuit The only suit in the air-conditioned world. It heats and cools the human body.

USE Periodi 4 seasons. Spring Summer Autumn Winter. In all public and private closed places. In all outdoor locations and in extreme climatic conditions of heat and cold

ACCESSORIES Helmet, hood, gloves, boots, refriguing bodice. Exoskeleton for Empowerment of Human Movements and Strength. Adjustable thermostat for temperature

BATTERIES Full-length suit battery life: 15 hours at full capacity. Total batteries: 4 lithium batteries 2 self-rechargeable batteries

LOGO Logo with number 8 half red and half blue. Infinite alternation continuous balance of cold heat.

INVENTOR AND OWNER OF THE PATENT LUCA FALACE’S INVENTION AND PATENT

 

Luca Falace | www.lucafalace.com Info: [email protected]

Over 41 inventions by luca falace

INVENTIONS AND PATENTS OF LUCA FALACE: THE FDL CODES OF THE INVENTIONS by Luca Falace

LINK: http://amzn.eu/d/cHbBiT3

 
 
 
 

LUCA FALACE PROPRIETARIO DEL BREVETTO GENIUS-OM, INVENTORE DEL MACCHINARIO PER LA COMPATTAZIONE MULTIPLA E CREATORE DEL PROTOTIPO SIMULATIVO

GENIUS-OM COMPATTATORE PROTOTIPAZIONE INDUSTRIALE DELL’INVENZIONE

GENIUS-OM COMPATTATORE

OPZIONI PROGETTO GENIUSOM

 1 Introduzione e Precisazioni

Brevetto Geniusom: come proprietario del Brevetto, dal titolo: ”MACCHINARIO COMPATTATORE MULTIPLO, PER RIFIUTI DOMESTICI E PUBBLICI URBANI, MEDIANTE LA FORZA PNEUMATICA ORIGINATA DA UN GENERATORE D’ARIA, AVENTE N MODULI PER OGNI SEZIONE DI RIFIUTI URBANI DI DIVERSA ORIGINE, PER LA DIFFERENZIAZIONE E LA COMPATTAZIONE DEL VOLUME DEI PRINCIPALI RIFIUTI URBANI: ORGANICI-UMIDI, VETRO, PLASTICA, METALLO, CARTA” comunemente chiamato dai media Nazionali (Rai, Mediaset, Confindustria, Smau, Ecomondo, Fondazione per lo Sviluppo Sostenibile, Tibz Technologybiz, ecc.) semplicemente con il nome “GeniusOm”, per indicare il nome dello stesso ritrovato, ovvero l’invenzione del macchinario brevettato, dopo la notorietà acquisita e l’affermazione del Brand, “GeniusOm”, la pubblicità avvenuta a livello nazionale ed internazionale della mia invenzione, dopo queste importantissime fasi di risposta favorevole del mercato, dei media, enti ed istituzioni, la fase successiva sarà quella di procedere nella prototipazione industriale del compattatore Genius-Om.

1) Precisando che, il brevetto è di mia proprietà, e non ha alcun legame, con il team della mia vecchia start-up dal nome Geniusom, (nome del Brand da me ideato e documentato) in tal senso il team non ha nessun legame con l’idea e l’invenzione del ritrovato; ovvero, la start-up Geniusom, che porta il nome del compattatore, Genius-Om, da me ideato, da me inventato, fu costituita con un team d’ingeneri, in occasione di un’eventuale finanziamento, per la prototipazione e commercializzazione del mio brevetto, che non ho mai depositato all’interno della società.

2) Il team non volendo più attendere altro tempo, per un eventuale finanziamento è voluto uscire e mettere in liquidazione la start-up, poiché dalla costituzione della società Srls, in data 2013, fino alla chiusura nell’anno 2017, la società inattiva, non ha ricevuto alcun finanziamento, per la prototipazione della mia invenzione. In tal senso la start-up geniusom è stata chiusa nel mese di Dicembre, dell’anno 2017.

3) GeniusOm è anche il nome della mia invenzione ed essendo l’ideatore del progetto, l’ideatore dell’invenzione e il proprietario del Brevetto ed avendo, da solo, nel corso di questi anni investito tutto il mio denaro che avevo a disposizione; nella brevettazione, nel marketing, nella sponsorizzazione, per quanto concerne le spese per gli spostamenti a livello

nazionale; premiazioni, interviste, partecipazione emittenti radiofoniche, televisive, public relations, pranzi e cene di lavoro, creazione del progetto, costruzione creazione di siti web, creazione di tutte le pagine in tutti i social network più importanti sul web, creazione di tutti i disegni e progetti bidimensionali e in 3d, in riferimento alla mia invenzione e a tutto quello che concerne il progetto, creazione e pubblicazione di marchi e logo, creazione del prototipo creazione e pubblicazione di marchi e logo, creazione del prototipo virtuale, del prototipo in 3d, creazione ed ideazione di tutte le parti meccaniche virtuali in simulazione in 3d, costruzione con le proprie mani e denaro, del prototipo simulativo materico, in legno con vernice in metallo, da esporre in televisione su reti Mediaset e Rai, ecc. in tal senso potrò avvalermi di società, che possono portare avanti il mio progetto e valorizzare il mio duro lavoro, il mio impegno e, con la riuscita del progetto rientrare con le spese in denaro, da me investito. E nella forte credenza della realizzazione del mio progetto, quale unico lavoro e dunque, in un relativo futuro guadagno personale, e per tutti quelli che mi affiancheranno nel progetto.

4) In ogni caso lascio aperta la porta all’intero vecchio team, (start-up Geniusom) poiché i nostri rapporti umani sono e rimangono di amicizia e stima reciproca, nel caso in cui, in un futuro remoto, vogliano collaborare in qualsiasi settore a loro congeniale e anche nella produzione e commercializzazione della mia invenzione, con le loro personali aziende.

5) Nell’anno, 2017, sono stato contrattato dall’azienda MrC, la quale si è offerta per affiancarmi ed aiutarmi nella realizzazione della prototipazione del mio Brevetto: ”Compattatore unico universale…”. Con relativo preventivo per quanto concerne il primo prototipo, meccanico industriale, del mio compattatore. In tal senso per il momento tale azienda e tante altre saranno prese in considerazione per lo sviluppo del progetto Geniusom.

OPZIONI PROGETTO GENIUSOM

A) Vendere il brevetto. Vendere il brevetto ad un eventuale Società. 

B) Concessione del Brevetto. Dare in concessione il brevetto ad un eventuale Società.

C) Condivisione Brevetti. Inserimento con i miei brevetti, nel settore ricerca e sviluppo, in una eventuale Società tecnologica.

D) Realizzazione del prototipo. Finanziare la creazione del prototipo meccanico 15.000,00 Euro richiesti da una società che realizza i prototipi con l’Università di Roma. (Vedi Know-how in allegato). Dopo la creazione del prototipo industriale, vi sarà la presentazione ufficiale dell’invenzione attraverso tutti i mezzi di comunicazione: web, stampa, radio e televisione. Reperimento dei primi fondi, per il primo prototipo, attraverso canali quali: Venture Capital, finanziamenti pubblici o privati, ecc.

E) Aprire una nuova start-up. Aprire una nuova società con il mio Brevetto, con un nuovo Team, sfruttando il nome Geniusom. (Il Brand Geniusom é noto ormai come marchio a milioni di italiani grazie a Mediaset e RAI). Finanziamenti a fondo perduto, per la realizzazione di una nuova società, che prevede la produzione dei compattatori. Trovare finanziamenti a fondo perduto: per la produzione dei compattatori GeniusOm. (Vedi Know-how, Business Plan, produzione e vendita Compattatoti GeniusOm, in allegato)

F) Vendere Brevetto e Prototipo. Vendere il Brevetto ed il prototipo ad IGNIS S.p.a. Elettrodomestici, con la mediazione di Fabio Cannavale di Shark Tank, fondatore di lastminute.com group. (Come concordato con Fabio Cannavale, finanziatore di Shark Tank, Mediaset, amico della famiglia, IGNIS Elettrodomestici. Fabio amico della famiglia IGiNS. Vedi Know-how in allegato)

G) Le tue Opzioni per lo sviluppo del progetto GeniusOM. Invia le tue opzioni, idee, collaborazioni ecc. per lo sviluppo di Geniusom. Scrivi a Dott. Luca Falace:

E-mail: [email protected] | Website: www.lucafalace.com

Project © Genius-Om L.E.T.S.I.S. Ecological Technology Line With Intelligent System Solutions by Luca Falace

Luca Falace’s Invention, Patent, Prototype, Know-how and Brand. 

© Genius-Om Patent

 

ELENCO DEI DOCUMENTI IN ALLEGATO:

1. Preventivo del primo prototipo industriale Azienda MrC.

2. Documentazione storica dei contatti per quanto concerne la vendita e la concessione del

Brevetto e del primo prototipo meccanico industriale.

3. Business Plan, per la creazione di una nuova società, che prevede la prototipazione

dell’intera gamma di compattatori (domestico, condominiale e pubblico) e ‘inizio della

produzione e vendita dei compattatori; su mercato Nazionale ed Internazionale.

SEGUE DOCUMENTAZIONE IN LINGUA INGLESE:
 
 
 
 
 
 
 
 

Geniusॐ

GeniusOM Compactor 

 ZERO WASTE

 

April 11, 2017

RAI 2, Radio Italian Television,

Luca Falace, GeniusOm

RAI 2, Radio Italian Television, Luca Falace, GeniusOm. Television program “The Facts Your” Giancarlo Magalli RAI 2, Tuesday, April 11, 2017. Luca Falace and Giancarlo Magalli, GeniusOm, Patent Office Rai 2.

RAI 2, Radio Italian Television, Luca Falace, GeniusOm. Television program “The Facts Your” Giancarlo Magalli RAI 2, Tuesday, April 11, 2017. Luca Falace and Giancarlo Magalli, GeniusOm, Patent Office Rai 2.
RAI 2, Radio Italian Television, Luca Falace, GeniusOm. Television program “The Facts Your” Giancarlo Magalli RAI 2, Tuesday, April 11, 2017. Luca Falace and Giancarlo Magalli, GeniusOm, Patent Office Rai 2.
VIDEO, RAI 2, Radio Italian Television, Luca Falace, GeniusOm: 
 
 

GENIUSOM COMPACTOR

SOLVES THE PROBLEM OF WASTE ALL OVER THE PLANET EARTH

 
1) The compactor geniusom compacts the 80% of the volume of all the public urban waste, solving the problem at the origin of the world’s municipal waste.
2) The compactor geniusom is the only machine in the world that a single command can shrink by 80% and differentiate all the municipal waste: organic, moist, plastic, paper, undifferentiated, metal and glass.
3) The patented compactor geniusom mechanism can be manufactured to any size and and therefore endless types of geniusom compactors can be built with the same mechanism to fit into any home site, private or public in any place where the human being is, offering a new essential service all over the world.
4)The machinery has different sections for each type of waste and it compacts each one, making it possible to throw waste away once two weeks rather than on daily bases.
5) The costs of the compactor are low and therefore it becomes easy to distribute it throughout the global market, becoming an indispensable good for civilization.
 
GeniusOM | Geniusॐ Compactor | ZERO WASTE​
Video 00:50 seconds  
 
 
Video 01:26 minutes
 
Mechanism of the Machine 
 
 
Video 01:46 minutes  
 
 
Video 02:10 minutes  
 
GeniusOM | Geniusॐ Compactor | Full Video 
 
Video 04:44 minutes  
 

 

GENIUS-OM COMPACTOR

GeniusOm is a start-up which has patented the solution for the disposal of rubbish: a device able to compact most type of waste. Its appearance is similar to most household appliances making it suitable for schools, hospitals, airports, planes and ships.
The machine has been conceived to sort waste in different categories: paper, metals, undifferentiated and wet waste.
There are three available models at the moment suitable for domestic, condominiums and hospital employment, which will all be using the same patented mechanism.
The domestic version is the same size of a common household appliance. The machinery has different section for each type of waste and compacts each one, making it possible to throw waste away once a week rather than on a daily bases.
Special filters for wet waste are also provided. Moreover, the company is planning a generator able to transform organic waste into energy.
 

ZERO WASTE

The GENIUSOM machinery was developed for domestic and urban use. It reduces significantly the amount of urban waste, making the disposal and separate collection of wet, plastic, metal and paper waste possible.
 

PATENT COMPACTOR THREE

TYPES OF GENIUSOM COMPACTOR

The device can be used in both a domestic and public environment. The downsizing of different waste is done by the same machinery.
Due to its reduced handy and technological size it can be considered just like any other household appliance and therefore essential for public and domestic comfort.
The size of the two modesl  for public use varies depending on its employment, in schools, hospitals, restaurants, hotels and condominiums.
 

COMPANY DESCRIPTION

AND TARGET MARKET

GeniusOm was funded to provide a real solution to the disposal of community waste. Its objective is to develop, produce and sell a selection of compactors for the separate collection of waste.
The devices will have a great price/performance ratio. Even if the prototype is still to be produced, the main project and the specification of the product are completed.
The company commends a team of engineers, experts in measuring and control systems and in the production of industrial machineries.
The key to the success of GeniusOm is in the ability of the team to handle and create a wide variety of innovative products and to subsequently sell it with a good price/quality ratio to a wide market.
The co-founders of GeniusOm are valued experts, whose experience will generate a synergy in support of modern society.
 

A RADICAL SOLUTION TO THE VOLUME

AND SEPARATE COLLECTION OF WASTE

OPERATING PRINCIPAL OF THE MACHINARY

Compressing machinery powered by compressed air, for domestic and community waste, with a unique press air-operated.
The power derives from an air compressor, made of a surface with five, variable, sections joint to a pneumatic piston, which when activated allows the compression of all the waste found in the sections of the device.
The result is a  compacting of urban and domestic waste and a separate collection of wet waste, plastic, paper, metals and even glass in a separate section. The compressed waste is collected separately at the bottom of the device.
 

FIELD OF BUSINESS AND PRODUCTS

The main field of business of GeniusOm consists in the production and selling of waste compactor.
The company’s aim is to be become part of the household appliances market with an innovative solution for separate waste collection.
Thanks to its patented project, GeniusOm will produce a domestic compactor and a bigger version appropriate for public places such as hospitals, hotels, restaurants, schools, universities, etc.

 

COMPETITION

The models proposed by competitors have some clear disadvantages, first of all they are rotating compactors, that provide the transition and compression of waste via opposite cylinders, positioned in the top part of the device. The sensor is activated by the machinery when it detects waste or hand-operated, but the most important detail is the ability of the device to compress just one residue at a time.
Moreover these models have a single narrow slot in for waste making its employment highly uncomfortable for the user. At the moment the market is composed by companies that produce and sell:
Hand operated compactors, which can be placed on a wall, envisage the user to compress a whole bag of waste at a time by placing it under the lever, this is a cheap but clearly inconvenient solution.
Single compressing bins which make the purchase of various units, for different refuse, compelling and do not, however, compress a large quantity of waste.
Single section, electric compactors which do not solve the separate waste collection problem. Prototype models of separate waste collection compactors, which we consider our direct competitors, which are pricey solutions and do not guarantee the compression of all types of waste.
 

GENIUSOM UNIQUE COMPACTOR

FOR ALL WASTE

This innovative device, represents a practical solution and a radical change to the problem of domestic and community waste solving the problem at its source.
The machinery, by compacting all kinds of community waste, solves the problem of waste disposal at its origin.
Our product, allows the compression of all waste and can really represent a revolution in the way community waste is handled.
It represents the ultimate and concrete solution to high amounts of refuse and separate waste collection.

THE GENIUSOM MACHINERY WAS INVENTED FOR DOMESTIC AND URBAN USE

THE MACHINE HAS BEEN CONCEIVED TO SORT WASTE IN DIFFERENT CATEGORIES:
PAPER, METALS, UNDIFFERENTIATED AND WET WASTE.

THERE ARE THREE AVAILABLE MODELS SUITABLE FOR
DOMESTIC USE, CONDOMINIUMS, SCHOOLS, UNIVERSITIES,
HOSPITALS, RESTAURANTS, HOTELS, MALLS, STATIONS,
PORTS, AIRPORTS, PLANES AND SHIPS.
ALL THE MODELS USE THE SAME PATENTED MECHANISM
THE MACHINERY, BY COMPACTING ALL KINDS OF COMMUNITY
WASTE, SOLVES THE PROBLEM OF WASTE DISPOSAL AT ITS ORIGIN.
THIS INNOVATIVE DEVICE, REPRESENTS A PRACTICAL SOLUTION AND A RADICAL CHANGE TO THE PROBLEM OF DOMESTIC AND COMMUNITY WASTE SOLVING THE PROBLEM AT ITS SOURCE.
 fig.1
fig.2
ZERO WASTE
GENIUSOM UNIQUE COMPACTOR
FOR ALL WASTE.

 

STORY

GeniusOM Compactor,

Luca Falace’s Invention and Patent

 
Investment total cost of 53,000 euros incurred only by Luca Falace: patent fees, events, contacts, marketing, company ‘, processing drawings and documents, prototype simulation, project presentations, marketing, participation in events, participation and personal presence in awards and awarded prizes, etc.
 

GENIUSOM COMPACTOR

Certification and Summary

 

THE YEAR 2014

 
For all these reasons the Geniusom Patent has received considerable and important awards
in the Green Economy field:
 
 

 

GENIUSOM PRIZE ECOMONDO 2014

WITH THE ACCESSION OF

THE PRESIDENT OF

THE ITALIAN REPUBLIC

AWARD FOR

SUSTAINABLE DEVELOPMENT

GeniusOM Compactor, Luca Falace’s Invention and Patent
Geniusom Prize Ecomondo 2014
 

THE YEAR 2015

 

FINANCING FUNDS

NOW APPROVED

GENIUSOM COMPACTOR,

SHARK TANK ITALY, CHANNEL ITALIA1

 
Italian television network MEDIASET, CHANNEL ITALIA1, on the 4th of june, 2015.
The financing of 250 thousand Euros, to finance the industrial prototype of the compactor geniusom, was never receved by me. The 99% of the competitors winners, whose project was approved during the television programme SHARK TANK ITALY 2015, weren’t financed by the the financers, hosted on the programme, because of the lack of money. This television programme was on the air on the important, serious and professional Italian television networkMEDIASET, CHANNEL ITALIA1, on the 4th of june, 2015.

 

THE YEAR 2016

 

COMPACTOR PATENT CERTIFICATION

GENIUSOM COMPACTOR, LUCA FALACE’S INVENTION AND PATENT
PATENT COMPACTOR THREE TYPES OF GENIUSOM COMPACTOR
The device can be used in both a domestic and public environment. The downsizing of different waste is done by the same machinery. Due to its reduced handy and technological size it can be considered just like any other household appliance and therefore essential for public and domestic comfort. The size of the two models for public use varies depending on its employment, in schools, hospitals, restaurants, hotels and condominiums.

 

THE PATENT CERTIFICATE

ABSTRACT OF THE PATENT

CLAIMS
1. Compressed air machinery with a compressed air press whose floor is equipped with a plurality of five and it is fixed to a pneumatic piston [a] which in its compression action enables the top press to compress any waste present in the five different sections of the machinery, in order to be collected separately in the light air containers available at the bottom of the machine.
2. Compressed air machinery characterized by the fact that the compressed-air piston enables the top of the press, to make inside of the five modules, or the five sections in which the five major municipal waste are present :organic-wet , glass, plastic, metal, paper, the waste collection with the reduction of the eighty percent of the original volume of all major municipal waste.
3. Machinery according to claim 2 characterized by the fact that the portion of rectilinear motion of the press, which goes to compress on municipal waste contained in modules, acts in a differentiated manner in the related compartments at the end of the compression proces
4. Machinery according to claim 3 allows the differentiation of compressed waste deposited with a reduction of the eighty percent of the original volume.
5. Machinery according to claims 1 to 4, characterized by the fact that the device which allows the action of ignition may be variable: with one or more pistons up to five, as many as the section modules of differentiation, with a single switch or individual switches for how many modules housing the waste, with a single foot, or a foot for each form of waste. This depends on the industrialization of machinery; for household or public use, or for practical and economic variants, as regards the production of machinery.
6. Machinery according to claims 1 and 4, characterized by the fact that after the user has introduced each differentiated waste in the appropriate container by means of a small door, the press can work only when all five doors are closed hermetically.
7. Machinery according to claims 1,3,4 characterized by the fact that when the compression process is over, it reduces the size eighty percent of the volume of waste in each module. The compressor waste is conveyed in the individual sections, before their extraction. At the base of each module there is a removable drip tray for emptying the accumulated liquids . In this container it is conveyed the fluid resulting from the compression of the waste ,especially the organic one, and all the others in a smaller quantity: glass, plastic, metal, cardboard. Regarding the section, in particular the form of organic waste-wet, at the base of this form of machinery, there is a drip tray greater than all the others.
8. Machinery according to claims 1 to 7, characterized by the fact that the deposit of the four waste: glass, plastic, metal, cardboard can lie in the conteiner until this is filled and ready tobe emptied.
9. Machinery according to claims 1 to 8, characterized by the fact that all the sections that collect wet waste are subject, at each compression, simultaneously to a sterilization action of the compressed matter.
10. Machinery according to claims 1 to 9 characterized by the fact that the modules present in the machinery have a dedicated small door and a specific inclination downwards, to allow the compressed material, to be collected in any container plasticized in emptying phase.
 

THE YEAR 2017

RAI 2, Radio Italian Television, Luca Falace, GeniusOm. Television program “The Facts Your” Giancarlo Magalli RAI 2, Tuesday, April 11, 2017. Luca Falace and Giancarlo Magalli, GeniusOm, Patent Office Rai 2. Global Solution to the origin of the urban waste problem.

 
Luca Falace and Giancarlo Magalli, GeniusOm, Patent Office RAI 2,
Radio Italian Television, April 11, 2017
Luca Falace and Giancarlo Magalli, GeniusOm, Patent Office RAI 2,
Radio Italian Television, April 11, 2017
Luca Falace and Giancarlo Magalli, GeniusOm, Patent Office RAI 2,
Radio Italian Television, April 11, 2017
Luca Falace and Giancarlo Magalli, GeniusOm, Patent Office RAI 2,
Radio Italian Television, April 11, 2017
 
 

INDUSTRIAL PROTOTYPE

ENGINEERING MACHINE

START PRODUCTION

FUNDING REQUIRED ON INDEGOGO
The request is made on indiegogo internationally: EURO 250 thousand industrial realization of geniusom prototype, a sum that serves for the realization of the industrial prototype (Prototype Engineering Machine) of the geniusom compactor. This request is being made to work at the geniusom project, approved by awards, accolades and fame at a national level, so that people can know as well as understand the importance of the project, also realize what could be a global business by solving the problem at the origin of the waste urban public.
 

EXAMPLES OF MARKET

GLOBAL COSTS

GENIUSOM COMPACTOR

Examples of market global costs

 
The costs of the compactor are low and therefore it becomes easy to distribute it throughout the global market, becoming an indispensable good for civilization.

 

Domestic Compactor

 

 

Prototype for Simulation

Prototype for Simulation

 

 

​SUMMARY 

GENIUSOM COMPACTOR

ZERO WASTE

1) The compactor geniusom compacts the 80% of the volume of all the public urban waste, solving the problem at the origin of the world’s municipal waste.
2) The compactor geniusom is the only machine in the world that a single command can shrink by 80% and differentiate all the municipal waste: organic, moist, plastic, paper, undifferentiated, metal and glass.
3) The patented compactor geniusom mechanism can be manufactured to any size and and therefore endless types of geniusom compactors can be built with the same mechanism to fit into any home site, private or public in any place where the human being is, offering a new essential service all over the world.
4)The machinery has different sections for each type of waste and it compacts each one, making it possible to throw waste away once two weeks rather than on daily bases.5) The costs of the compactor are low and therefore it becomes easy to distribute it throughout the global market, becoming an indispensable good for civilization.
  • The price of a domestic compactor:
about $ 350 (buildings, offices, boats, schedules flights trains, restaurants, bars, hotels, hospitals, universities, etc.)
  • The price of the compactor for large private or public buildings:
about $ 1,700 (condos, shopping centers, ports, airports, railways, large structures, parks etc.)

GENIUSOM PITCH | SLIDE

GeniusOM L.E.T.S.I.S

Line Ecological Technology with
Intelligent Systems Solutions

 

GENIUSOM ZERO WASTE

LINK

 
GENIUSOM DOCUMENTS
WEB SITE
SOCIAL NETWORK
FACEBOOK PAGE
BLOG
 

Segue documentazione fotografica dettagliata>>>

 
Tag.: ECOLOGY, URBAN ECOLOGY, ZERO WASTE,
WASTE MANAGEMENT, GREEN, GREEN ECONOMY.